Filter By:
Other
$29.00 - $32.00
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer.
Top caps are compatible with all 1-1/8" aluminum steerer tubes.
The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.
KIT INCLUDES
- EDC TOP CAP
- EDC steerer plug
- 2x 1mm, 3mm, & 5mm Headset Spacers
- V2 kit includes all the parts required to rebuild your V2 dropper post (replacement seal, upper and lower bushings, anti-rotation pins)
- V2.1 kit is an updated rebuild kit for V2 posts which includes an improved midcap assembly with ultra-low friction SKF seals, upper and lower bushings and anti-rotation pins
- OneUp has found that ~95% of posts with slow top out were caused by low air pressure. Please make sure to check this first and do so with the post fully extended. Proper air pressure is 280-300psi at full extension, and the valve is located under the top clamp
- If you are still having slow top out then there is a possibility that the upper white bushing needs replacement. This will be evident by the original bushing being difficult to reinstall after being removed
- V2.1 kit is an updated rebuild kit for V2 posts which includes an improved midcap assembly with ultra-low friction SKF seals, upper and lower bushings and anti-rotation pins
- OneUp has found that ~95% of posts with slow top out were caused by low air pressure. Please make sure to check this first and do so with the post fully extended. Proper air pressure is 280-300psi at full extension, and the valve is located under the top clamp
- If you are still having slow top out then there is a possibility that the upper white bushing needs replacement. This will be evident by the original bushing being difficult to reinstall after being removed
- V2 kit includes all the parts required to rebuild your V2 dropper post (replacement seal, upper and lower bushings, anti-rotation pins)
- V2.1 kit is an updated rebuild kit for V2 posts which includes an improved midcap assembly with ultra-low friction SKF seals, upper and lower bushings and anti-rotation pins
- OneUp has found that ~95% of posts with slow top out were caused by low air pressure. Please make sure to check this first and do so with the post fully extended. Proper air pressure is 280-300psi at full extension, and the valve is located under the top clamp
- If you are still having slow top out then there is a possibility that the upper white bushing needs replacement. This will be evident by the original bushing being difficult to reinstall after being removed
- V2.1 kit is an updated rebuild kit for V2 posts which includes an improved midcap assembly with ultra-low friction SKF seals, upper and lower bushings and anti-rotation pins
- OneUp has found that ~95% of posts with slow top out were caused by low air pressure. Please make sure to check this first and do so with the post fully extended. Proper air pressure is 280-300psi at full extension, and the valve is located under the top clamp
- If you are still having slow top out then there is a possibility that the upper white bushing needs replacement. This will be evident by the original bushing being difficult to reinstall after being removed
$23.00
- Kit includes all the parts required to rebuild your V3 dropper post:
- 4 x brass guide pins
- 2 x polymer guide pins
- 1 x mid cap assembly
- 1 x mid cap seal (dust wiper)
- 1 x upper bushing
- 2 x lower bushings
- 1 x cartridge spacer
- 4 x brass guide pins
- 2 x polymer guide pins
- 1 x mid cap assembly
- 1 x mid cap seal (dust wiper)
- 1 x upper bushing
- 2 x lower bushings
- 1 x cartridge spacer
Page 1 of 1