Brakes/Levers/Pads

Lock rings for all TRP Centerlock Rotors

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20

Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade. - Aluminum spider - Includes rotor fixing bolts and locking washers

Shimano H03C Metal Disc Brake Pads keep you in control in any conditions with cooling fins for those endless, grin-inducing descents.. - Fits Saint BR-M820 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Aluminum radiator cooling fins increase pad life and reduce brake fade

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

Shimano Ultegra RT800 centerlock disc rotors. - Aluminum spider - Includes standard type rotor lockring - Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds - Rotor Type: Two Piece

- XT-grade 6-bolt rotor - Stainless steel braking surface for long lasting durability - Cutouts help with mud clearing and cooling - Large forged alloy spider supports rotor surface, increasing rigidity and heat dissipation while reducing weight - Comes complete with mounting hardware

Shimano XT RT86 6-Bolt Disc Rotor - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes rotor fixing bolts and non-turn washers - Hub/Disc Compatibility: 6-Bolt Disc - Weight: 173 g - Rotor Size (mm): 203 mm - Rotor Type: Two Piece - Pad Compatibility: All Pad Compounds

Shimano XTR BL-M9100 Race Hydraulic Disc Brake Levers The Shimano engineers have redesigned the XTR 9100 brake levers from a braking system that had been already the benchmark among mountain bike braking systems. For the BL-M9100 levers both the clamp and the lever body itself have been modified. The clamp moves further into the middle of the lever and is angled. This cleverly supports the outer end of the expansion tank directly on the handlebars and creates an additional counter bearing for lever actuation. This significantly increases stiffness and stability, what ultimately leads to an even more direct brake feeling and improved control. So the BL-M9100 is 10% stiffer than its predecessor, too. Of course, the reach of the lightweight XC brake lever with a magnesium housing is individually adjustable. Thanks to the I-Spec EV design the XTR SL-M9100-I shifting levers can be mounted directly to the brake lever. - Brake Lever: BL-M9100 with reach adjustment - Material housing: magnesium - Material lever: Carbon - Compatibility: I-SPEC-EV - Position brake lever: Front Left, Right Rear - Brake Hose: SM-BH90-SS (not included) - Weight: 312g

The pinnacle in mountain bike braking, SHIMANO XTR RT-MT900 disc brake rotors deliver superb stopping power for the most aggressive riding. The ICE TECHNOLOGIES FREEZA rotors dissipate heat to maintain braking performance on long downhill stretches. SHIMANO's CENTER LOCK mounting system makes installing and removing rotors quick and easy thanks to the spine mount and lock ring design. High-performance and consistent brake performance - Stable and versatile brake performance in the most demanding conditions New ICE TECHNOLOGIES FREEZA construction for boosting heat dissipation - Surface temperature cooled by -20°C (vs RT99, 203 mm) Rotor size - 160 mm, 180 mm, 203 mm

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs (140mm, 160mm, 180mm, 200mm) - Compatible with both road and mountain bike brakes

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

We spend a lot of time obsessing over feel, and SwingLink technology brings our best R&D to life. The G2 RS offers riders the joys of SwingLink—getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It's one small movement for your finger, one monumental upgrade to your braking. - Power organic pads give riders both feel and bite - Bleeding Edge for simple fluid installation and maintenance - Tool-free reach adjust for quick personalization

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management - Hub Compatibility: Center Lock - Disc Material: Steel

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

The fully loaded Maven Ultimate Expert Kit is equipped with everything you need to get to the starting line aboard SRAM’s most powerful brake. The pair of limited-edition red splash anodized Maven Ultimate brakes are your anchors. With the calipers housing monstrous 18 and 19-millimeter pistons, you’ve got nearly 50% more power than Code on hand. With so much baseline power on hand, there is more range than ever before to tune the ride qualities to exactly how you want. With this in mind, the Maven Expert Box has been assembled with four HS2 rotors in three different sizes (1x 220mm, 2x 200mm, 1x 180mm) as well as both organic and sintered XL brake pads for up to 14 different tuning combinations. A custom travel bag keeps your rotors safe when in transit, and when you finally need it, the included Pro Mineral Bleed kit has the tools necessary to service your brakes. Whether you’re landing on the podium or not, the Maven Expert Box contains everything you need to find your winning combination. 2-Piece forged aluminum caliper features 18 and 19.5-millimeter pistons for best-in-class power Stiff 4-piston caliper with best heat management and easier bolt access Organic pads come standard for the best modulation and the quietest ride Stealth lever architecture with forged aluminum body and lever provide a sleeker, more modern ride Swinglink and lever pivot bearing for signature SRAM lever feel Contact Point Adjust and Tool-free reach adjustment for customized feel to each rider Polished titanium hardware provides the strength and weight savings you'd expect from this top-of-the-line brake Designed for use with Maxima Mineral Brake Oil only for low maintenance and high performance 950mm front brake hose and 2000mm rear brake hose

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

8 Series Disc Brake Pads - Disconnected two piece back plate - The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes - Set of four disc brake pads and two pad retaining bolts for one caliper

Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually

Kool-Stop disc brake pads designed for use with Shimano disc brakes. - Features a copper plated backing plate and sintered pad compound for extreme conditions like down hill - Compatible with Shimano direct mount BR-RS505/805, Dura Ace BR-R9170, Ultegra BR-R8070/BR-R7070, GRX BR-RX810/BR-RX400, Metrea BR-U5000, XTR M9100, and Tiagra 4770

Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.

The good friction. Speed and confidence come with better braking. Refresh or update the best brakes in the world with some new pads! Brake pads for your Dominion A4 come in 2 flavors: Sintered T100 Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 (aka free-range organic) friction material provides enhanced modulation and silent operation. Gluten-Free. Includes 2 pads, retention screw.

- Forged alloy pad construction - Heat reducing finned design - Pad runs cooler increasing power - Organic Semi metallic material - 24.8g

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Zipp Center Lock Lockring for 140mm to 160mm

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

- High Performance Brake Pads - Disc Pad Material: Organic

- Forged aluminum arms - 102mm arm length - 158g

- Top mount levers for use with caliper or cantilever brakes - Forged aluminum - Hinge clamp style - Return spring and reach adjustment - Black - 90g / pair

- BMX aluminum levers for caliper or U-brakes - 2-piece hinged clamp

Bred from the racetrack, the newly formulated Performance Resin Pads are our highest performing pads to date. - New Performance Resin Compound - Fits all TRP 2-Piston Calipers - Increased Heat Stability - Shorter Bed-In Process - Provides a lighter lever feel - Increases power transfer with a snappy initial bite - Sold Per Wheel

Bred from the racetrack, the newly formulated Performance Resin Pads are our highest performing pads to date. - New Performance Resin Compound - Fits all TRP 4-Piston Calipers - Increased Heat Stability - Shorter Bed-In Process - Provides a lighter lever feel - Increases power transfer with a snappy initial bite - Sold Per Wheel

Semi-Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" - Semi-metallic compound for minimal noise with maximum power - Fits all TRP four piston calipers and Tektro four piston calipers - Color: TRP red - Sold per wheel - Replacment pad for Tektro Q10YS

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

TRP Alloy Rim brake pads are specifically designed for aluminum rim braking surfaces. - High performance brake pads - Aluminum rim compound - Fits all TRP road brakes, InPlace cartridges, Shimano and Shimano compatible road cartridges - Color: Black - Sold in sets of 4 (2 pairs)

- Replacement hydraulic tubing with fittings

- Ergonomic lever blade - Advanced 9mm internal brake lever piston - 5mm hydraulic brake hose - High performance hydraulic brake fluid - Hybrid pistons - High performance resin pad compound - New high flow caliper - 2.3mm thick rotors - CNC machined and marked adapters - Compatible with 223/220/203/180/160/140mm rotors (sold separately) - Weight: 310g (Front without rotor and adapter)

TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers

Full sintered metallic replacement pads for flat mount Hylex RS brakes. - Full metallic compound for maximum performance and power - Fits Hylex RS brakes - Color: TRP Copper - Sold per wheel

With the evolution of disc brakes on time trial bikes, TRP saw the need for a high-performance hydraulic TT disc brake resulting in the all-new HD-T910. We took a unique approach to the time trial brake by combining speed and style which resulted in the TT Hydro. Initially, the lever was handcrafted from clay before being finished off in aluminum. This allowed our designers to offer maximum ergonomics and an elegant visual appearance. From there it was forged from alloy, given a replaceable rubberized grip, and finished off with a carbon lever blade. The lever is matched to a black flat mount caliper designed to offer controlled braking at any speed. The levers come in two widths for differing bar diameters: - For bars measuring a diameter between 22-24 mm: HD-T910 - For bars measuring a diameter between 24-25 mm: HD-T912 - HD-T910 (OD 22-24 mm) - HD-T912 (OD 24-25 mm) - Carbon Fiber Lever Blade - Forged Alloy Lever Body - TRP 2-Piston Flat Mount Caliper - Integrated and Replaceable Grip - Anodized Black - 5.0 mm High Quality Hose with 1900 mm length - Factory Pre-Bled with EZ-Plug System - Blip or Di2 Shifter Adapter Inserts Available - Top Loading Pad Design - 390g (front) - Minimum bar insertion is 55mm

TRP HY/RD disc brake calipers have the power and modulation of hydraulic disc brakes. True ‘plug-and-play’ compatibility with existing cable actuated systems. - Self-contained hydraulic caliper incorporates master cylinder - Hydraulic system self-adjusts for pad wear - Compatible with all mechanical road and CX brake levers - Brake pad composite is Resin with Metal Fibers - Resin with Metal Fibers pads are compatible with Resin-Only type rotors as well as standard rotors

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right

High performance brakes for your daily commuter or race machine. R879 brakes are the perfect blend of race day performance and everyday value. Forged then CNC’d 6061-T6 aluminum arms and a familiar cam style quick release make these brakes the perfect match for any modern road levers. SPECIFICATIONS - R879 - Forged / CNC machined 6061-T6 aluminum arms - In-place adjustable CNC road cartridge pad holders - TRP Carbon and Aluminum compound pads included - Stainless Steel hardware - Cam style quick release - Color: Anodized Black - Reach: 39-49mm - Weight: 160g Front 158g Rear including hardware - Maximum Rim Width: 27mm - Sold as Pair (front and rear) - Note: R879 calipers have a forging stamp that says “R870”. This marking is not indicative of model number.

- Non-Integrated brake levers for urban, Singlespeed, Cross, Tri and tt use - Ergonomic aluminum lever with grippy, textured rubber hoods - Includes spring loaded push button cable tension quick release.

Replacement hoods for your RRL levers.

The RRL SR transcends the ages by offering a race quality lever without an integrated shifter. The classic styling trademarked by heroes of decades past make this a stylish lever for single speeds, fixed gear or custom applications. Th ergonomically shaped lever is drilled to enhance beauty while reducing weight. Hoods are flat and textured for enhanced grip. A built-in push button quick release system provides cable slack for quick wheel removal or additional tire clearance when conditions get muddy. SPECIFICATIONS - RRL SR - Available with gum or black hoods. - Pull ratio compatible with Spyre and road/cyclocross rim brakes - Sold as a set (left and right)

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel

The forged aluminum Spyke Levers have all the features you would expect from TRP: the ergonomic 2-finger design, Teflon bushings, forged clamp, and return spring. Mated to our Spyke calipers, these levers connect rider and machine for near-telepathic braking feel. - Lightweight design - Ergonomic lever design - Alloy lever and bracket - Teflon bushings - Stainless steel hardware - 2-finger lever blade - For use with RapidFire shifters - Weight: 156g/pair